Zettex
MS 52 Facade Sealer

High-quality MS polymer EPDM adhesive for roofing from Zettex, your private label manufacturer.

Zettex MS52 EPDM facade adhesive is a low VOC hybrid polymer EPDM adhesive with high initial tack for horizontal and vertical bonding of EPDM rubber sheeting in, for example, facades, along eaves, along window frames or in gutters. This EPDM adhesive is extremely elastic and is ready-to-use. In addition, MS52 can be used as an overlap sealer and for bonding TPO, PVC and bitumen. As a manufacturer, we have developed this EPDM adhesive to also work on extremely wet substrates and as a sealant for all joints found on roofs.

  • Ready-to-use.
  • Adheres to all types of EPDM, TPO, PVC and bitumen.
  • Adheres to high moisture substrates.
  • High initial adhesion.
  • Excellent UV resistance.
  • High temperature resistance 200 degrees.
  • Extremely elastic.
  • Available in 600 ml foil. Other packaging on request.

More information? Want to download the TDS or SDS? Then go to the Portal.

MS52 EPDM MS Polymer adhesive

Buy your MS polymer EPDM adhesive directly from the manufacturer or under your own private label?

With production facilities in the Netherlands and Poland, we are your partner and manufacturer for high-quality MS polymer EPDM adhesives. Thanks to our in-house R&D, our own marketing department and a highly efficient production process, we respond very quickly and remain highly flexible. Although we easily produce large volumes, we offer our partners the option of setting up their own private label for smaller quantities as well. And we like to keep the process clear and personal: throughout the entire process, you will always deal with one permanent contact person.

Frequently Asked Questions

Yes, as a manufacturer of EPDM adhesive for roofs, we can supply this product on a private label basis. The vast majority of our turnover consists of private label products. We can fully personalise both the product packaging and the box for you, using pre-printed packaging or labels. Our organisation and production facilities are fully geared towards this. We would be happy to discuss your requirements and the options available.

You will have a single dedicated contact person throughout the entire process. We also have our own marketing department that can support you with the design of the label. We can also provide the necessary documentation and UFI codes. We are happy to work with you on the entire sales process to successfully launch the product on the market.

Read more

There are two options: a sealant cartridge with screen printing or a sealant cartridge with a label. Screen printing is the most attractive and professional option and is the most popular choice. The minimum order quantity (MOQ) for this is 1,248 units.

A sealant cartridge with a label is less common, but is possible thanks to our in-house labelling machines.

As a manufacturer, we prefer larger production batches, so that you benefit from more efficient production and more competitive purchase prices. At the same time, we are keen to work closely with start-ups and growing brands and strive for a flexible, long-term partnership.

Interested in the possibilities? Please contact us for a bespoke proposal, tailored to your specific requirements. Call us on +31 (0) 888 93 88 39 or email sales@zettex.com.

Read more

MS52 Facade EPDM Bond adheres to all types of EPDM, TPO, PVC and bitumen, as well as to damp substrates. The adhesive is used for bonding EPDM membrane horizontally and vertically to façades, along roof edges, around window frames and in gutters. The substrate must be clean, dry or slightly damp, free from oil and grease, and structurally sound.

Read more

Apply the adhesive in even beads to the substrate using a glue gun. After a few minutes, place the film onto the adhesive and press it down firmly with a roller. When bonding vertically, it may be necessary to lift the film briefly after the initial pressing, reposition it and press it down firmly. The minimum application temperature is +5 °C.

Read more

MS52 is a low-VOC paste adhesive with high initial tack, a skin formation time of 5 minutes and an elongation at break of 900 per cent; in addition to EPDM, it also bonds to TPO, PVC and bitumen. MS50 is an adhesive and sealant with an elongation at break of 550 per cent for bonding and sealing EPDM membranes, such as overlap joints, connection details and repairs. MS52 is available in a 600 ml tube and a 200-litre drum.

Read more

Get in touch

Questions about our products or options? If so, please contact us.
Send a message