Zettex
PU 80 Industrial Vehicle Adhesive

Advanced fast-curing PU sealant from your manufacturer

Zettex PU 80 IF is a flexible, one-component fast-curing PU adhesive. This adhesive makes the window stronger and has been specially developed so that you and your vehicle can get back on the road quickly, even on vehicles with airbags. Zettex PU 80 IF is suitable for direct glazing of vehicles where high shear modulus and non-conductive properties are required. In addition, this PU sealant is isocyanate-, solvent- and odour-free. As a manufacturer, we have developed Zettex PU 80 IF to combine the high modulus properties that provide additional strength and are needed to maintain torsional rigidity, low volume resistance and good high-frequency properties.

  • One-component polyurethane.
  • Suitable for cold and hot application.
  • Good stability and processability.
  • Suitable for use with integral antennas.
  • Fast application and curing.
  • Prevents contact corrosion in aluminium vehicles.
  • Non-conductive.
  • High modulus, maintains torsional rigidity and increases vehicle NVH values.
  • Available in 290ml cartridges and 600ml film.

More information? Want to download the TDS or SDS? Then go to the Portal.

fast-curing pu sealant for automotive

Buy fast-curing PU adhesives directly from the manufacturer or under your own private label?

With production facilities in the Netherlands and Poland, we are your partner and manufacturer for high-quality and fast-curing PU adhesives. Thanks to our in-house R&D, our own marketing department and a highly efficient production process, we respond very quickly and remain highly flexible. Although we easily produce large volumes, we offer our partners the option of setting up their own private label for smaller quantities as well. And we like to keep the process clear and personal: throughout the entire process, you will always deal with one permanent contact person.

Frequently Asked Questions

Yes, as a manufacturer of fast-curing PU window sealant, we can supply this product on a private label basis. The vast majority of our turnover consists of private label products. We can fully personalise both the product packaging and the box for you, using pre-printed packaging or labels. Our organisation and production facilities are fully geared towards this. We would be happy to discuss your requirements and the options available.

You will have a single dedicated contact person throughout the entire process. We also have our own marketing department that can support you with the design of the label. We can also provide the necessary documentation and UFI codes. We are happy to work with you on the entire sales process to successfully launch the product on the market.

Read more

There are two options: a sealant cartridge with screen printing or a sealant cartridge with a label. Screen printing is the most attractive and professional option and is the most popular choice. The minimum order quantity (MOQ) for this is 1,248 units.

A sealant cartridge with a label is less common, but is possible thanks to our in-house labelling machines.

As a manufacturer, we prefer larger production batches, so that you benefit from more efficient production and more competitive purchase prices. At the same time, we are keen to work closely with start-ups and growing brands and strive for a flexible, long-term partnership.

Interested in the possibilities? Please contact us for a bespoke proposal, tailored to your specific requirements. Call us on +31 (0) 888 93 88 39 or email sales@zettex.com.

Read more

PU 80 is a fast-curing PU window sealant with a drive-off time of 30 minutes. This drive-off time applies exclusively under the conditions specified in the accompanying FMVSS 212 test report. The open time is 10–15 minutes and the cure rate is approximately 3 mm per 24 hours at +23 °C and 50% relative humidity.

Read more

PU 80 achieves a tensile strength of ≥ 9 N/mm² with an elongation at break of ≥ 350% and a hardness of 60–65 Shore A. Due to its high modulus, the bonded windscreen contributes to the body structure, which maintains torsional stiffness and improves NVH performance (noise, vibration and ride comfort). For vehicles fitted with driver- and passenger-side airbags, PU 80 complies with the Federal Motor Vehicle Safety Standards.

Read more

Yes, PU 80 can be applied at temperatures ranging from -5 °C to +40 °C, for both the product and the substrate. Please note the restrictions: the adhesive does not cure in the presence of silicone, is not suitable as a sealant for parts that are permanently submerged, and does not adhere to PE, PP, PTFE and bituminous substrates.

Read more

Get in touch

Questions about our products or options? If so, please contact us.
Send a message