Zettex
WinterFoam

High-quality winter PU foam for cold temperatures from your manufacturer.

As a manufacturer, Zettex has developed this winter PU foam so that it can be used at temperatures as low as -30 degrees Celsius. This winter PU foam cures based on humidity. Once cured, this PU foam is a very good temperature and sound insulator, has strong adhesive properties and a fire class B2 (DIN 4102-1). This winter PU foam adheres well to most building materials, with the exception of PTFE, polyethylene and silicone surfaces. Zettex Winterfoam is widely used for installing doors and windows, insulating and fixing pipes, filling holes and gaps, fixing wall panels and roof tiles, and for thermal insulation.

  • Short drying time.
  • Once sprayed, the surface shows no stickiness. The cured material does not remain sticky.
  • Fire class B2.
  • Available in 750 ml aerosol with straw or as NBS pistol version.

More information? Want to download the TDS or SDS? Then go to the Portal.

winter PU foam for cold temperatures

Buying winter PU foam directly from a manufacturer or under your own private label?

With production facilities in the Netherlands and Poland, we are happy to be your partner and manufacturer for this advanced winter PU foam. Thanks to our in-house R&D, our own marketing department and a highly efficient production process, we respond very quickly and remain highly flexible. Although we easily produce large volumes, we offer our customers the option of setting up their own private label for smaller quantities as well. And we like to keep the process clear and personal: throughout the entire process, you will always deal with one permanent contact person.

Frequently Asked Questions

Yes, as a manufacturer of winter PUR foam, we can supply this product under a private label. The vast majority of our turnover consists of private label products. We can fully personalise both the product packaging and the box for you, using pre-printed packaging or labels. Our organisation and production are fully geared towards this. We would be happy to discuss your requirements and the options available.

You will have a single dedicated contact person throughout the entire process. We also have our own marketing department that can support you with the design of the label. We can also provide the necessary documentation and UFI codes. We are happy to work with you on the entire sales process to successfully launch the product on the market.

Read more

The minimum order quantity (MOQ) is 840 units. Aerosol cans are usually fitted with a professional label. We carry this out in our own factory using our own labelling machines.

It is also possible to have the aerosol cans printed using offset or lithographic printing. A minimum order quantity applies for this, ranging from 5,000 to 15,000 units.

As a manufacturer, we prefer larger production batches, so that you benefit from more efficient production and more competitive purchase prices. At the same time, we are keen to work closely with start-ups and growing brands and strive for a flexible, long-term partnership.

Interested in the possibilities? Please contact us for a bespoke proposal, tailored to your specific requirements. Call us on +31 (0) 888 93 88 39 or email sales@zettex.com.

Read more

Zettex Winterfoam NBS can be applied at ambient temperatures ranging from −18 °C to +30 °C. It is essential that you keep the aerosol can itself at a temperature of preferably between +10 °C and +25 °C before and during use. Please note that curing takes longer at low temperatures than under standard conditions.

Read more

The substrate must be clean, load-bearing and free from dust, grease, oil, ice, frost and loose particles. Moisten mineral substrates only lightly if the temperature and conditions permit, and never apply water to frozen substrates. Fill the gap only partially and, for wide or deep joints, apply in several layers.

Read more

A 750 ml aerosol can of Winterfoam NBS yields approximately 40 litres of foam. The foam is tack-free after 5–7 minutes, dry after 10–12 minutes and can be cut after 30–45 minutes. The thermal conductivity (λ) is 0.035–0.040 W/(m·K).

Read more

Get in touch

Questions about our products or options? If so, please contact us.
Send a message