Zettex
StoneFix

Block adhesive PU foam for extreme adhesion of aerated concrete, sand-lime brick and gypsum blocks.

Zettex Stonefix is a one-component block adhesive foam for bonding blocks and bricks during construction work. Compared to cement, Stonefix glues masonry more easily and faster. The use of the Zettex Foamgun is necessary. Zettex Stonefix forms a strong adhesive bond within 30 minutes. This block adhesive pur foam is widely used for quick bonding of building blocks on non-load-bearing interior walls. In addition, this block adhesive PU foam can also be used for bonding, for example, palisade strips in a garden. Zettex Stonefix can be used both indoors and outdoors for bonding various types of stone.

  • Ready-to-use immediately.
  • Very fast.
  • Extremely powerful.
  • Easy to use.
  • Easy dispensing.
  • Multi-purpose.
  • Non-flammable.
  • Available in 750ml aerosol NBS for gun.

More information? Want to download the TDS or SDS? Then go to the Portal.

stone glue PU foam spray

Buy block adhesive PU foam directly from a manufacturer or under your own private label?

With production facilities in the Netherlands and Poland, we are happy to be your partner and manufacturer for this advanced block adhesive PU foam. Thanks to our in-house R&D, our own marketing department for label design and a highly efficient production process, we respond very quickly and remain highly flexible. Although we easily produce in large volumes, we offer our customers the option of setting up their own private label for smaller quantities as well. We like to keep the process clear and personal: throughout the entire process, you will always deal with one permanent contact person.

Get in touch

Questions about our products or options? If so, please contact us.
Send a message

Frequently Asked Questions

Yes, as a manufacturer of block adhesive polyurethane foam, we can supply this product on a private label basis. The vast majority of our turnover consists of private label products. We can fully personalise both the product packaging and the box for you, using pre-printed packaging or labels. Our organisation and production facilities are fully geared towards this. We would be happy to discuss your requirements and the options available.

You will have a single dedicated contact person throughout the entire process. We also have our own marketing department that can support you with the design of the label. We can also provide the necessary documentation and UFI codes. We are happy to work with you on the entire sales process to successfully launch the product on the market.

Read more

The minimum order quantity (MOQ) is 840 units. Aerosol cans are usually fitted with a professional label. We carry this out in our own factory using our own labelling machines.

It is also possible to have the aerosol cans printed using offset or lithographic printing. A minimum order quantity applies for this, ranging from 5,000 to 15,000 units.

As a manufacturer, we prefer larger production batches, so that you benefit from more efficient production and more competitive purchase prices. At the same time, we are keen to work closely with start-ups and growing brands and strive for a flexible, long-term partnership.

Interested in the possibilities? Please contact us for a bespoke proposal, tailored to your specific requirements. Call us on +31 (0) 888 93 88 39 or email sales@zettex.com.

Read more

With Zettex Stonefix, you can work faster, cleaner and with less effort than with traditional cement-based mortar, using less water, fewer mixing tools and producing less product waste. The product is ready for immediate use and forms a slightly foaming adhesive layer that compensates for minor irregularities between dimensionally stable building elements. It is not intended for structurally filling large cavities or highly uneven surfaces.

Read more

Once cured, Stonefix has an adhesive strength of 150 kPa and a shear strength of 700 kPa. The bond is resistant to temperatures ranging from −40 °C to +90 °C. The product has fire class E in accordance with EN 13501-1.

Read more

Stonefix should be applied at temperatures between +5 °C and +35 °C; the ideal range is +10 °C to +25 °C, which also applies to the aerosol can itself. Lightly moistening the substrate promotes curing and can improve the foam structure and yield, but do not apply excess water. For structural applications, always follow the specifications and technical approvals of the building system.

Read more