Zettex
PU Fix

Universal adhesive polyurethane foam direct from your manufacturer.

Zettex PU Fix is an adhesive PU foam for bonding stone and wood on very many surfaces. With this adhesive PU foam, you have an extremely fast bond. This adhesive foam can be used for bonding all types of stone, ceramics and granite. Zettex PU Fix can be used both indoors and outdoors. This adhesive foam dries very quickly and has an extremely high tensile strength. With this adhesive PU Fix foam, you have a ready-to-use product for bonding walls, planters, pond edges, speed bumps, wood, metal, rubber and more. As a manufacturer, Zettex has developed this adhesive PU foam so that it cures very quickly and is easy to dose.

  • Ready-to-use immediately.
  • Very fast.
  • Extremely powerful.
  • Easy to use.
  • Easy dispensing.
  • Multi-purpose.
  • Available in 750 ml aerosol for gun (NBS).

More information? Want to download the TDS or SDS? Then go to the Portal.

Universal adhesive PU foam for stone, wood and many other applications.

Have your own private label in adhesive PU foam and buy directly from a manufacturer?

With production facilities in the Netherlands and Poland, we are happy to be your partner and manufacturer for this universal adhesive PU foam. Thanks to in-house R&D, our own marketing department for label design and a highly efficient production process, we respond very quickly and remain highly flexible. Although we produce large volumes without any problems, we offer our customers the option of setting up their own private label for smaller quantities as well. We like to keep the process clear and personal: throughout the entire process, you will always deal with one permanent contact person.

Frequently Asked Questions

Yes, as a manufacturer of universal adhesive polyurethane foam, we can supply this product on a private label basis. The vast majority of our turnover consists of private label products. We can fully personalise both the product packaging and the box for you, using pre-printed packaging or labels. Our organisation and production facilities are fully geared towards this. We would be happy to discuss your requirements and the options available.

You will have a single dedicated contact person throughout the entire process. We also have our own marketing department that can support you with the design of the label. We can also provide the necessary documentation and UFI codes. We are happy to work with you on the entire sales process to successfully launch the product on the market.

Read more

The minimum order quantity (MOQ) is 840 units. Aerosol cans are usually fitted with a professional label. We carry this out in our own factory using our own labelling machines.

It is also possible to have the aerosol cans printed using offset or lithographic printing. A minimum order quantity applies for this, ranging from 5,000 to 15,000 units.

As a manufacturer, we prefer larger production batches, so that you benefit from more efficient production and more competitive purchase prices. At the same time, we are keen to work closely with start-ups and growing brands and strive for a flexible, long-term partnership.

Interested in the possibilities? Please contact us for a bespoke proposal, tailored to your specific requirements. Call us on +31 (0) 888 93 88 39 or email sales@zettex.com.

Read more

Yes, Zettex PU Fix is a universal adhesive polyurethane foam that bonds masonry more easily and quickly than traditional mortar, with less waste such as buckets, mixing tools and water. A strong adhesive bond forms within 30 minutes. However, PU Fix is not suitable for load-bearing structures or bonds that are permanently exposed to high loads.

Read more

The open time is 5 minutes, the skin formation time is 8–12 minutes and the minimum mechanical setting time is 30 minutes. After approximately 45 minutes, the foam can be cut, and full strength is achieved after 24 hours. The bond strength is 150 kPa and the shear strength 700 kPa.

Read more

PU Fix is suitable for stone-like surfaces such as stacking blocks, pond edging, hollow blocks, concrete, aerated concrete and fibre cement, as well as for wood, rubber and window sills or thresholds. The 750 ml aerosol can be applied using a foam gun such as the Zettex Foamgun. The product does not adhere well to PE, PTFE and PP.

Read more

Get in touch

Questions about our products or options? If so, please contact us.
Send a message