Zettex manufactures an extensive range of SBR contact adhesives. High quality and extremely strong adhesion.
Professional spray and contact adhesives for EPDM, insulation materials and flat materials. Fast processing, strong adhesion and long open time. Produced for optimal efficiency in the workplace, also available under your own label.
Zettex produces an extensive range of contact adhesives for a wide variety of applications. We are happy to think along with you about your customers' needs.
Sprayable contact adhesive is ideal for fast, even bonding of larger surfaces. With its high tack and good "tack", you secure materials smoothly, with a neat adhesive layer and minimal waste. As a manufacturer, we can tailor the spray characteristics, open time and heat resistance to your application, also as a private label. Zettex supplies this spray adhesive for larger areas in a pressure sprayer and for smaller areas in a handy 500 or 750 ml aerosol can.
Water-based contact adhesives are a smart choice when looking for low odour and a friendlier processing profile. They are often non-flammable and are a good fit for projects where emissions and working environment are important. As a manufacturer, we supply water-based contact adhesives in various viscosities and packaging, including private label.
Solvent-based contact adhesives are known for fast drying, strong initial adhesion and reliable performance on many substrates. This type of contact adhesive is broadly applicable and, depending on formulation, can perform extra well at higher temperatures or difficult materials. As a manufacturer, we can fine-tune contact adhesives for processing, open time and adhesion, and produce them as private labels if required.
Polyurethane contact adhesives offer a strong, durable bond and are suitable when you have high demands for strength, moisture resistance and long-term performance. PU contact adhesives are often chosen for demanding applications and substrates where extra security is needed. As a manufacturer, we think about the right PU formulation and also supply this type of contact adhesives as private label.
Yes, as a manufacturer of contact and spray adhesives, we can supply these products on a private label basis. The vast majority of our turnover consists of private label products. We can fully personalise both the product packaging and the box for you, using pre-printed packaging or labels. Our organisation and production are fully geared towards this. We would be happy to discuss your requirements and the options available.
You will have a single dedicated contact person throughout the entire process. We also have our own marketing department that can support you with the design of the label. We can also provide the necessary documentation and UFI codes. We are happy to work with you on the entire sales process to successfully launch the product on the market.
This depends on the packaging. For spray adhesives, the MOQ is 48 units for canisters, 1,008 units for 500 ml aerosol cans and 840 units for 750 ml aerosol cans. For contact adhesive in tins, we are very flexible: orders start from as little as 100 units, complete with a professional label.
As a manufacturer, we prefer larger production batches, so that you benefit from more efficient production and more competitive purchase prices. At the same time, we are keen to work closely with start-ups and growing brands and strive for a flexible, long-term partnership.
Interested in the possibilities? Please contact us for a bespoke proposal, tailored to your specific requirements. Call us on +31 (0) 888 93 88 39 or email sales@zettex.com.
Contact and spray adhesives should be applied to both surfaces to be bonded; when using spray adhesive, maintain a distance of approximately 30 cm between the spray gun and the surface. Allow the adhesive to dry until the minimum open time has elapsed (3 to 6 minutes for most types), then join the parts together within the maximum open time of 60 minutes and press or roll them firmly into place; it is virtually impossible to make corrections afterwards. One exception is Zettex Spraybond X90 Hybrid: this is suitable for single-sided application and has a maximum open time of 8 to 10 minutes.
Spray adhesives from the Zettex Spraybond X range are available in aerosol cans for smaller jobs and in canisters (e.g. 18.9 or 21.9 kg) for professional application using a spray gun and a hose measuring 3.5, 5 or 8 metres.
The roll-on Easycontact contact adhesives from the S-series can be applied with a brush or roller and are available in various tins, 200-litre drums and 1,000-litre IBC containers.