Hoe verwerk je oplosmiddelhoudende contactlijm op de juiste manier?

Ensure the surface is clean, dry and free from dust and grease. Apply the contact adhesive thinly and evenly to both surfaces to be bonded using a roller, notched trowel or spraying equipment. For most Easycontact adhesives, the consumption is around 150 g/m².

Allow the adhesive to air-dry until it is touch-dry: the adhesive will feel tacky but will not stick to your finger. Then join the parts together and press them firmly or roll them with a pressure roller. Contact adhesive bonds instantly; once joined, it is no longer possible to make corrections. You can join the parts together within the open time, which is up to 6 hours for some types. Please refer to the Technical Data Sheet (TDS) for the specific product for the exact flash-off time and application temperature.