MS Polymer coatings

Zettex supplies an extensive range of MS Polymer self-levelling coatings for waterproofing roofs, walls, gutters and basements.

High-quality MS Polymer Roof Coatings, direct from your manufacturer.

Are you looking for the ultimate weatherproof sealant for roofs and gutters? Our MS polymer roof coating is an innovative liquid coating specially developed to make complex roof surfaces durably and seamlessly waterproof. As a manufacturer, we supply this high-quality liquid roof sealant directly to wholesalers and specialists, ideal for the professional roofer or installer.

Liquid Roof Sealant for Roof Connections and Gutters

Preventing leaks requires a product that moves with temperature fluctuations and resists extreme weather conditions and UV radiation. Our MS polymer coating is isocyanate-free, permanently elastic and adheres effortlessly (often primer-free) to virtually all, even damp, substrates. This liquid solution is perfect for:

  • Roof connections: the 100% waterproof sealing of complex transitions at chimneys, skylights, roof penetrations and ventilation pipes.
  • Gutters and valley gutters: lightning-fast and seamless repair and protection of zinc, lead and plastic gutters against corrosion and leakage.
  • Seams and joints: a durable and flexible sealing of overlaps in existing roofing, such as bitumen, EPDM and metal roofing sheets.
  • Large roof surfaces: applying a protective liquid coating that significantly extends the life of flat and pitched roofs.

Buy roof coating directly from the manufacturer or Own Private Label?

Make a difference in the roofing market by buying directly from the source. We supply our MS polymer roof coatings in large volumes to technical wholesalers, building materials retailers and specialist suppliers. In addition, we are your specialist for private label. So you market a rock-solid liquid roof coating under your own brand name, fully supported by our in-house R&D, consistent quality and flexible production.

Frequently Asked Questions

Yes. Zettex manufactures waterproof MS polymer coatings, such as MS 10 Roofguard and MS 15 RoofGuard, under your own brand name as well. The coatings are supplied in 5, 15 and 20-litre buckets. Standard colours are white, grey and black; other colours are available on request.

You provide your brand name and design, and we take care of production, filling and labelling. This allows you to bring a roofing coating free from solvents, bitumen, silicones and isocyanates to market under your own label. Please contact us for a bespoke proposal.

Read more

The minimum order quantity (MOQ) for MS polymer coating under private label is 100 units per variant. This applies to the 5-, 15- and 20-litre buckets.

As a manufacturer, we prefer larger production batches, so that you benefit from more efficient production and more competitive purchase prices. At the same time, we are keen to work closely with start-ups and growing brands and strive for a flexible, long-term partnership.

Interested in the possibilities? Please contact us for a bespoke proposal, tailored to your specific requirements. Call us on +31 (0) 888 93 88 39 or email sales@zettex.com.

Read more

Yes. Zettex’s MS polymer coatings can be applied to a slightly damp surface, provided there is no film of water or standing water present. MS 15 RoofGuard is also immediately rainproof. The best adhesion is achieved on a dry surface, but complete drying is not always necessary.

The substrate must be solid, clean and load-bearing, and free from dust, grease and loose particles. Clean the surface beforehand with Zettex Profi Cleaner. Repair any large holes or cracks first using a suitable repair mortar. Apply the coating at temperatures between +5 °C and +35 °C.

Read more

Always apply MS polymer roof coating in two coats. For a watertight seal with MS 15 RoofGuard, the recommended consumption is approximately 2 to 4 kg/m², with a total dry film thickness of at least approximately 3 mm. For MS 10 RoofGuard, a minimum of 0.7 kg/m² per coat is required on pitched roofs and 0.9 kg/m² per coat on flat roofs. As a fixing or anti-slip layer beneath concrete tiles, approximately 0.8 kg/m² is often sufficient.

Apply the second coat after approximately 4 to 8 hours, depending on temperature and humidity, and no later than 36 hours. For surfaces of approximately 15 m² or more, high-traffic areas and internal corners, we recommend using a reinforcing mesh in the first coat.

Read more

MS polymer coating adheres well to most building materials, including concrete, brick and masonry, ceramics, glass, timber and plywood, and metals such as aluminium, steel, zinc and copper. The coating is also suitable for the renovation and repair of old sanded or slate-bitumen membranes and old PVC roofing membranes. Always test the adhesion on PVC first.

The coating does not adhere well to PE, PP, PC, PMMA, EPDM, natural stone, bare bitumen and fresh concrete. Do not use the product for fish ponds, drinking water reservoirs or applications subject to permanent water exposure where drinking water suitability is required.

Read more