Zettex
Patch pad

Zettex Patch Pad, the ideal sealing collar and repair patch for EPDM roofs.

Zettex Patch Pads are bespoke EPDM sealing collars for the quick and durable sealing of internal corners, external corners, T-joints and repair points on EPDM roofs. This rectangular repair patch is designed for roof details where extra protection against water ingress is required. Thanks to its flexible structure, the sealing sleeve moulds well to the substrate and is highly suitable for critical connections on flat roofs.
The butyl-based adhesive layer ensures strong adhesion to most clean and dry substrates. For optimal application, the EPDM roofing membrane must always be thoroughly cleaned and primed before the repair patch is applied.

  • Suitable for use as a repair patch for EPDM and most TPO roofing membranes.
  • Suitable for T-joints, corner joints and roof repairs.
  • Features a butyl-based adhesive layer for strong adhesion.
  • Adheres to most clean and dry substrates.
  • Helps prevent water ingress at vulnerable roof details.
  • Flexible sealing collar that moulds well to the roof structure.
  • Quick and easy to apply by professional roofers.
  • After application, press down with a steel roller to ensure optimum adhesion.
  • Finish the edges with a suitable sealant to ensure a proper seal.
  • Resistant to weather, water, water vapour and slightly acidic or alkaline solutions.
  • Colour black.
  • Nominal thickness approximately 80 mil.
  • Dimensions approx. 26.7 x 34.3 cm.
  • Shelf life approximately 12 months when stored correctly.

As a flexible private-label manufacturer of EPDM sealing collars, repair patches and roofing accessories, we are happy to assist you. As an experienced manufacturer, we work with you to develop products, packaging and applications for professional roofing solutions. Get in touch today.

More information? Want to download the TDS or SDS? Then go to the Portal.

EPDM sealing collar

Would you prefer to purchase an EPDM sealing collar or repair patch directly from the manufacturer, or under your own private label?

With production facilities in the Netherlands and Poland, we are your partner and manufacturer for high-quality EPDM sealing collars. Thanks to our in-house R&D, our own marketing department and a highly efficient production process, we can respond at lightning speed and are extremely flexible as a manufacturer. Although we have no trouble producing in large volumes, we offer our partners the freedom to set up a strong private label for EPDM repair patches, even in small batches. We are keen to keep the process surrounding your private label straightforward and personal: throughout the entire process, you will always deal with just one dedicated contact person.

Frequently Asked Questions

Generally speaking, butyl tapes themselves are not suitable for private label due to the limited printing options. However, we can personalise the roll on which the tapes are wound or the boxes in which they are packaged. We’d be happy to discuss your requirements to see what’s possible. As the entire production process takes place in-house, we’re very flexible.

Read more

The Zettex Patch Pad is an EPDM sealing collar with butyl mastic for the quick and durable finishing and sealing of details on EPDM roofs. It is used at corners, transitions between roofing membranes and areas where extra sealing or reinforcement is required. It is also ideal as a repair patch for quick repairs.

Read more

Clean the surface, ensuring it is dry and free from grease, oil and dust; apply a generous amount of Zettex P40 TF Primer using a scrub pad or brush and allow it to dry thoroughly to the touch. Remove the protective film, position the Patch Pad and press it down firmly. Then roll it in thoroughly with a roller, working from the centre outwards; do not apply the primer at temperatures below 5 °C.

Read more

The Patch Pad is a black EPDM collar with an adhesive layer based on butyl mastic. It is resistant to weathering, water, water vapour and acidic or alkaline solutions up to approximately 5 per cent, but is less resistant to petroleum products, fats, oils and solvents. Avoid high temperatures during storage and do not leave the product on the roof for prolonged periods.

Read more

Get in touch

Questions about our products or options? If so, please contact us.
Send a message