Zettex
Perimeter Tape

EPDM perimeter strip, butyl tape direct from the manufacturer

Zettex Perimeter Strip is a reinforced EPDM membrane to be installed under rubber at the edge of roofs or at angle changes of more than 4 degrees in height. This perimeter strip, also known as bilge fixing strip, is used to additionally fix EPDM roof membranes at critical points in the roof system. As a manufacturer, Zettex has developed this EPDM perimeter strip for durable and reliable edge and bilge fixations in EPDM roof constructions.

  • Professional EPDM perimeter strip / reinforced perimeter tape.
  • Resistant to weather, water and water vapour.
  • Resistant to acidic and alkaline solutions.
  • Suitable for EPDM roofing membranes.
  • To be installed with primer for optimum adhesion.
  • Adheres to most clean and dry substrates.
  • Colour black.
  • Shelf life approximately 12 months when stored correctly.
  • Thickness 1.14 mm. Width 152 mm. Length 30 metres.

As a flexible private label manufacturer of EPDM perimeter strip/ bilge fixing strip, we are staying at your disposal. Get in touch today.

More information? Want to download the TDS or SDS? Then go to the Portal.

perimeter strip / kim fixation strip epdm

Buy EPDM perimeter strip directly from the manufacturer or under your own private label?

With production facilities in the Netherlands and Poland, we are your partner and manufacturer for high-quality EPDM reinforced perimeter strips. Thanks to our in-house R&D, our own marketing department and a highly efficient production process, we are dedicated to meet all your expectations and are extremely flexible as a manufacturer. Although we easily produce large volumes, we offer our partners the freedom to set up a powerful private label for EPDM perimeter strips even in small runs. We like to keep the process surrounding your private label clear and personal: throughout the entire process, you will always deal with just one contact person.

Frequently Asked Questions

Generally speaking, butyl tapes themselves are not suitable for private label due to the limited printing options. However, we can personalise the roll on which the tapes are wound or the boxes in which they are packaged. We’d be happy to discuss your requirements to see what’s possible. As the entire production process takes place in-house, we’re very flexible.

Read more

This depends very much on your requirements. There is no minimum order quantity (MOQ) for applying a sticker to a box. Would you like a personalised roll, for example? In that case, an MOQ does apply, the amount of which depends on your requirements. We’d be happy to explore the options for you.

As a manufacturer, we prefer larger production batches, so that you benefit from more efficient production and more competitive purchase prices. At the same time, we are keen to work closely with start-ups and growing brands and strive for a flexible, long-term partnership.

Interested in the possibilities? Please contact us for a bespoke proposal, tailored to your specific requirements. Call us on +31 (0) 888 93 88 39 or email sales@zettex.com.

Read more

Zettex Perimeter Strip is a reinforced EPDM membrane strip, 1.14 mm thick, which is installed beneath the EPDM roofing membrane at roof edges and at height or angle transitions exceeding 102 mm. This is also known as edge fixation. The strip has a 76 mm wide butyl mastic adhesive layer for bonding to the EPDM roofing membrane.

Read more

Apply the strip horizontally or vertically around the roof edge using 50 or 76 mm steel fixing plates, before laying the roofing membrane. Then clean the EPDM where it will come into contact with the butyl mastic, apply Zettex P40 TF Primer and allow it to dry to the touch. Remove the protective film from one side, position the EPDM, peel off the rest of the film and roll it out from the centre outwards.

Read more

The Perimeter Strip is available in 1.14 × 152 mm (2 rolls per box) and 1.14 × 254 mm (1 roll per box), both in 30-metre rolls and 48 pieces per pallet. The strip withstands temperatures from -40 °C to +80 °C and has excellent UV and weather resistance.

Read more

Get in touch

Questions about our products or options? If so, please contact us.
Send a message