Zettex
GunFoam NBS

High-quality PU foam for sealing and insulating your manufacturer.

Zettex Gunfoam NBS is a durable and fast-curing one-component insulation and expanding polyurethane gun foam developed for sealing and filling joints, seams and connections of stony substrates. This PU foam for use with pistol (NBS) has a very high output (44 litres), is quick-drying and fast-cutting. This expanding gun foam is universally applicable and resistant to almost all chemicals. The PU foam has been developed for sealing joints between partition walls, ceilings and floors and for pipe penetrations through walls and floors. In addition, this expanding gun foam is used for joints around window and door frames. This PU foam is also used for mounting windows and doors, filling hollow spaces, sealing holes and cracks in structures and sealing and filling mounting spaces between prefab elements. As a manufacturer, Zettex has developed this PU foam in such a way that it is not harmful to the ozone layer and has a very high insulation value.

  • Fast-drying.
  • High yield.
  • CFC, HCFC and HFC-free (not harmful to the ozone layer and does not contribute to the greenhouse effect).
  • High product density.
  • High insulation value.
  • Applicable to any substrate.
  • Limited UV resistant.
  • Finish with plaster.
  • Paintable.
  • Available in 750 ml aerosol with spout.

More information? Want to download the TDS or SDS? Then go to the Portal.

PU foam for use with gun in aerosol

Buy PU expanding foam for gun use (NBS) directly from the manufacturer or under your own private label?

With production facilities in the Netherlands and Poland, we are your partner and manufacturer for expanding gun foams. Thanks to our in-house R&D, our own marketing department and a highly efficient production process, we respond very quickly and remain highly flexible. Although we effortlessly produce in large volumes, we offer our partners the possibility to set up their own private label for smaller quantities as well. And we like to keep the process clear and personal: throughout the entire process, you will always deal with one permanent contact person.

Get in touch

Questions about our products or options? If so, please contact us.
Send a message

Frequently Asked Questions

Yes, as a manufacturer of gun-applied PUR foam, we can supply this product on a private label basis. The vast majority of our turnover consists of private label products. We can fully personalise both the product packaging and the box for you, using pre-printed packaging or labels. Our organisation and production are fully geared towards this. We would be happy to discuss your requirements and the options available.

You will have a single dedicated contact person throughout the entire process. We also have our own marketing department that can support you with the design of the label. We can also provide the necessary documentation and UFI codes. We are happy to work with you on the entire sales process to successfully launch the product on the market.

Read more

The minimum order quantity (MOQ) is 840 units. Aerosol cans are usually fitted with a professional label. We carry this out in our own factory using our own labelling machines.

It is also possible to have the aerosol cans printed using offset or lithographic printing. A minimum order quantity applies for this, ranging from 5,000 to 15,000 units.

As a manufacturer, we prefer larger production batches, so that you benefit from more efficient production and more competitive purchase prices. At the same time, we are keen to work closely with start-ups and growing brands and strive for a flexible, long-term partnership.

Interested in the possibilities? Please contact us for a bespoke proposal, tailored to your specific requirements. Call us on +31 (0) 888 93 88 39 or email sales@zettex.com.

Read more

It’s simple to use. You screw the can onto a PU foam gun, allowing you to dispense the foam precisely using the trigger. This enables you to apply exactly the right amount to joints, seams, connections and hollow spaces. The foam cures when exposed to atmospheric moisture and adheres to materials such as concrete, masonry, stone, wood and metal.

Read more

The thermal conductivity (λ) is 0.035–0.042 W/(m·K). The foam has a compressive strength of 27 kPa, a tensile strength of 80 kPa, an adhesive strength of 75 kPa and a dimensional stability of < 5 %. The cured foam is resistant to temperatures ranging from −50 °C to +78 °C and has fire class B3 in accordance with DIN 4102.

Read more

Once cured, Gunfoam NBS can be cut (after 45–65 minutes), sanded and painted over. Cured polyurethane foam has only limited resistance to UV radiation, so when used outdoors, it should be protected with a suitable sealant, coating, membrane or other finish. The foam is not suitable for permanent underwater applications.

Read more