Zettex
MS 40 Grassbond

The best synthetic adhesive for all your manufacturer's substrates.

Zettex MS 40 Grass Bond is a durable one-component artificial grass adhesive based on MS polymers. This artificial grass sealant is solvent-free, neutral and odourless. Zettex MS 40 Grassbond is ready-to-use and dries very quickly. As a manufacturer, we have developed this artificial grass adhesive so that it adheres excellently to artificial grass, PVC, polyester, stainless steel, steel, stone, wood, marble and virtually all substrates such as concrete, plastic, wood and granite. In addition, you can also use this artificial grass kit to glue two pieces of artificial grass together almost invisibly using seam tape.

  • Permanently elastic.
  • Can be applied to damp substrates.
  • Very good adhesion to virtually any substrate.
  • Very fast-drying, 4-5 mm per 24 hours.
  • Easy to spread.
  • Available in 290ml cartridges, 600ml film and 200 litre drums.

More information? Want to download the TDS or SDS? Then go to the Portal.

MS polymer synthetic turf adhesive / synthetic turf sealant

Buy high-quality MS polymer grass adhesive directly from your private label manufacturer

With production facilities in the Netherlands and Poland, we are your partner and manufacturer for MS polymer synthetic grass adhesive/artificial grass sealant. Thanks to our in-house R&D, our own marketing department and a highly efficient production process, we respond very quickly and remain highly flexible. Although we produce large volumes without any problems, we offer our partners the option of setting up their own private label for smaller quantities as well. And we like to keep the process clear and personal: throughout the entire process, you will always deal with one permanent contact person.

Frequently Asked Questions

Yes, as a manufacturer of artificial grass adhesive, we can supply this product on a private label basis. The vast majority of our turnover consists of private label products. We can fully personalise both the product packaging and the box for you, using pre-printed packaging or labels. Our organisation and production are fully geared towards this. We would be happy to discuss your requirements and the options available.

You will have a single dedicated contact person throughout the entire process. We also have our own marketing department that can support you with the design of the label. We can also provide the necessary documentation and UFI codes. We are happy to work with you on the entire sales process to successfully launch the product on the market.

Read more

There are two options: a sealant cartridge with screen printing or a sealant cartridge with a label. Screen printing is the most attractive and professional option and is the most popular choice. The minimum order quantity (MOQ) for this is 1,248 units.

A sealant cartridge with a label is less common, but is possible thanks to our in-house labelling machines.

As a manufacturer, we prefer larger production batches, so that you benefit from more efficient production and more competitive purchase prices. At the same time, we are keen to work closely with start-ups and growing brands and strive for a flexible, long-term partnership.

Interested in the possibilities? Please contact us for a bespoke proposal, tailored to your specific requirements. Call us on +31 (0) 888 93 88 39 or email sales@zettex.com.

Read more

Apply MS40 Grassbond using a sealant gun or, when applying directly from the bucket, with a 9 mm adhesive comb. Spread the adhesive evenly over the substrate or the adhesive tape and avoid any build-up of adhesive. Lay the artificial grass into the adhesive within a maximum of 12 minutes; after that, you still have approximately 3 to 5 minutes to make any adjustments.

Read more

MS40 Grassbond reaches its final strength within 48 hours and can then be subjected to loads. The adhesive cures when exposed to atmospheric humidity; lightly moistening the adhesive can speed up the curing process. Curing may be delayed with thicker layers of adhesive.

Read more

MS40 is suitable for PVC, polyester, steel, stone, concrete, plastic and wood, and can also be applied to damp surfaces. The adhesive does not bond well to PE, PP and bituminous surfaces. MS40 is solvent-free and virtually odourless, and is available as standard in black and green.

Read more

Get in touch

Questions about our products or options? If so, please contact us.
Send a message