Your own private label?
Here's what to look out for!

What should you look out for when considering a private label in adhesives or sealants?

Anyone who buys you adhesives, sealants and related products for a wholesale or technical trade knows how quickly "a tube of sealant" can turn into a headache. One customer wants low VOC, the other maximum adhesion on difficult substrates. Some customers demand documentation and certification down to batch level, while your range also has to keep running with reliable delivery times.

This is why more and more buyers are opting for private label: you build your own brand, margin and positioning, without having to run a factory yourself. But private label is only really successful if you collaborate with the right manufacturer and producer-one that can demonstrate quality, deliver in a scalable way and think along with you about product range and packaging.

In this article, you will find a practical checklist to use in selection interviews with a manufacturer/manufacturer of private label adhesives and sealants.

1) What exactly would you like to have produced under private label?

Private label sounds simple ("our label on it"). It can be. As a buyer, it is useful to have this in focus beforehand, so that you immediately ask the right questions of the manufacturer.

A. Private label (most commonly used)
You choose an existing formula from the manufacturer's range, with your brand and packaging. This is often the fastest in terms of time-to-market. With the right manufacturer, this can be realised quickly with personalisation in variations, design, tulle and packaging. A specialised manufacturer has a wide range, so there is almost always a suitable option for your customers.

B. Custom formula (maximum differentiation)
The manufacturer develops (or fine-tunes) a formulation for your application, market or standards. This usually requires more testing time and fine-tuning, but can make all the difference in a crowded segment. In many cases, this recipe can be produced exclusively for you.

Checklist questions:

  • Which private label route suits your market and expected volumes: private label or custom?
  • Can you vary colour, viscosity, skin formation, curing and processability?
  • Can you be distinctive without immediately developing a completely new formula?

2) How does the manufacturer prove that each batch is constant?

For you as a buyer, "quality" is only worth something if it is measurable and repeatable. A good manufacturer shows how quality assurance is set up-from incoming raw materials to final inspection.

Note these points:

Batch control and traceability

  • Is every batch checked for set parameters (e.g. viscosity, skin formation, curing, adhesion)?
  • Is there traceability from batch to final packaging?
  • Are reference samples kept for possible complaint analysis?

Test capacity and measurement methods

A professional manufacturer has at least routine testing and often R&D capacity. Relevant tests (depending on product group) include:

  • Tensile, peel and shear strength
  • Elongation at break / elasticity
  • Weather resistance (UV/aging)
  • Curing speed and skin formation
  • Adhesion on various substrates

Checklist questions:

  • Which batch tests are standard and which are optional?
  • Do you get measured values/COA (certificate of analysis) per batch or per production?
  • How are deviations and CAPA (corrective actions) dealt with?

3) As a buyer, what certification and documentation should you have in place as standard?

Especially in B2B, documentation is often as important as the product itself. A private label manufacturer should be able to provide you with up-to-date and accurate records.

Examples include:

  • SDS/safety sheet (current, by country/language if required)
  • CLP labelling (pictograms, H-/P-phrases, signal words)
  • UFI code (where applicable)
  • REACH information and compliance statements
  • Any specific statements (e.g. low VOC claims, food-contact where relevant, or industry requirements)

Checklist questions:

  • Does the manufacturer have this in place and do they supply this as standard?
  • Can the manufacturer support design and multilingual labelling?
  • How quickly are SDS and labels updated when legislation changes?

4) MOQ and cost structure: where are the real knobs?

MOQ (minimum order quantity) is often either a dealbreaker or an opportunity. A private-label manufacturer can be flexible, but there are always economic limits: raw materials, production lines, cleaning/conversion of lines and packaging materials.

Key cost drivers:

  • Packaging (cartridge, sausage/foil, bucket, aerosol, canister)
  • Colour (standard vs custom)
  • Label (pre-printed packaging or sticker for lower quantities)
  • Formula (standard or custom)
  • Logistics (ADR, pallets, storage, delivery time)

Checklist questions:

  • What is the MOQ per packaging type (and per colour)?
  • Are there any graduated pricing (price advantage for larger volumes)?
  • Can you start with a limited private label run and scale up later?

5) Leadtime and delivery reliability: how to avoid no-sales?

In many segments (construction, industry, automotive, roof, interior), availability is crucial. You want certainty: not just an "average delivery time", but also clarity on what happens in case of peak load or raw material issues.

What you look out for:

  • Does the manufacturer have multiple production sites or redundancy in capacity?
  • What does production planning look like: make-to-order, safety stock, forecast-based?
  • Is there control over critical chain components: packaging, labels, raw materials?
  • Can the manufacturer deliver faster in case of urgency?

Checklist questions:

  • What is the normal lead time per product group and packaging?
  • What is delivery performance (OTIF: on time in full) and how is it measured?
  • What arrangements are possible for stock (at manufacturer's or yours)?

6) Packaging & appearance: private label is also a product experience

Private label is not only about formula, but also about ease of use, safety and appearance. A manufacturer/manufacturer with experience can advise you on the best packaging for each application.

Examples of choices:

  • Cartridge vs sausage: processing, waste, speed, professional appearance
  • Aerosol vs canister: speed, cost per m², consistency, ergonomics
  • Nozzle/cap/valve selection: processing and dispensability
  • Colour coding per product line: fewer errors on construction/workshop sites

Checklist questions:

  • What packaging options can the manufacturer provide (including printing/colour)?
  • Can you offer different content sizes for different channels?
  • Are there any display or shelf presentation options for wholesale/retail?

7) Technical support: what will your customer get at the counter?

A strong private label range sells better when you can answer technical questions quickly. A good manufacturer will support you with:

  • Technical data sheets and processing tips
  • Application advice (substrate pre-treatment, primer, cleaning)
  • Training for account managers or product specialists
  • Complaint analysis support (incl. batch tracing)

Checklist questions:

  • Is there a technical helpdesk or application specialist available?
  • Can you think along in application texts and product positioning?
  • Is there support on processing instructions and FAQs?

8) Innovation & range: can the manufacturer grow with you?

Markets are changing: stricter emission requirements, demand for user-friendliness, new substrates, new standards. A private label manufacturer investing in R&D helps you keep the range future-proof.

Checklist questions:

  • How often are formulations improved or further developed?
  • Can you get prototypes or test batches faster at new opportunities?
  • Can you expand product lines (e.g. from sealants to cleaners/aerosols) at the same manufacturer?

Conclusion: private label only really works with the right manufacturer/manufacturer

Private label is a powerful growth accelerator for wholesalers and specialist distributors-provided you choose a manufacturer and manufacturer that can demonstrate quality, has compliance in place and can deliver reliably. Use the checklist above as a capstone for your selection process, and you will avoid private label becoming just a "label project" rather than a profitable product line.

Zettex: private label made easy

Adhesives and sealants and private label is our specialism. Over the past decades, we have fully developed as the private label manufacturer. We unburden you in the entire process and guide you from A to Z. Is that a long and laborious process? Not at all. If you have all facets in one organisation, you can switch quickly. For example, we can have a private label process in order within just a few weeks, including the necessary documents. All taken care of by us for you. We would be happy to invite you to our factory in the Netherlands and/or Poland.

Private label adhesives, sealants, pu-foam, spray adhesives

Get in touch

Questions about our products or options? If so, please contact us.
Send a message