Zettex
SprayFoam

Sprayable insulation PU foam for easy insulation of floors and walls.

This sprayable insulation PU foam is high-quality and flexible. This sprayable insulation PU foam is ready to use and can be used with matching nozzle. The Zettex Sprayfoam NBS is ideal for applying a thermal insulation layer quickly and easily to all common substrates in construction and industry. As a manufacturer, Zettex has developed this unique spray insulation foam so that it can be used at temperatures down to -10°C. The development and production of this product meet the strict requirements of ISO 9001/EN 29001 quality standards. This spray insulation foam is ideal for installing thermal insulation against walls, ceilings and floors. Especially in hard-to-reach places, this spray insulation foam is ideal. It is also widely used for sealing doors, attics, garages, tanks, barrels, smoke or air ducts and basements.

  • Excellent adhesion to all substrates.
  • Ready-to-use.
  • CFC, HCFC and HFC-free (ozone harmless and does not contribute to the greenhouse effect).
  • Excellent temperature, water and chemical resistance.
  • Thermal conductivity: 0.036 W/(m-K).
  • Excellent sound insulation values.
  • Less than 0.1% di-isocyanate content.
  • Resistant to most common chemicals.
  • High efficiency: 1.2 m² per canister.
  • Expansion value of over 80%.
  • Applicable to any substrate.
  • Fast skin formation (10 minutes).
  • Paintable.
  • Available in 750 ml aerosol for gun (NBS).

More information? Want to download the TDS or SDS? Then go to the Portal.

sprayable insulation PU foam in aerosol

Have your own private label in sprayable insulation PU foam and buy directly from a manufacturer?

With production facilities in the Netherlands and Poland, we are happy to be your partner and manufacturer for this sprayable insulation foam. Thanks to in-house R&D, our own marketing department for label design and a highly efficient production process, we respond very quickly and remain highly flexible.. Although we produce large volumes without any problems, we offer our partners the possibility to set up their own private label for this insulation foam even for smaller quantities. And we like to keep the process clear and personal: throughout the entire process, you always deal with one permanent contact person.

Frequently Asked Questions

Yes, as a manufacturer of sprayable PUR insulation foam, we can supply this product on a private label basis. The vast majority of our turnover consists of private label products. We can fully personalise both the product packaging and the box for you, using pre-printed packaging or labels. Our organisation and production facilities are fully geared towards this. We would be happy to discuss your requirements and the options available.

You will have a single dedicated contact person throughout the entire process. We also have our own marketing department that can support you with the design of the label. We can also provide the necessary documentation and UFI codes. We are happy to work with you on the entire sales process to successfully launch the product on the market.

Read more

The minimum order quantity (MOQ) is 840 units. Aerosol cans are usually fitted with a professional label. We carry this out in our own factory using our own labelling machines.

It is also possible to have the aerosol cans printed using offset or lithographic printing. A minimum order quantity applies for this, ranging from 5,000 to 15,000 units.

As a manufacturer, we prefer larger production batches, so that you benefit from more efficient production and more competitive purchase prices. At the same time, we are keen to work closely with start-ups and growing brands and strive for a flexible, long-term partnership.

Interested in the possibilities? Please contact us for a bespoke proposal, tailored to your specific requirements. Call us on +31 (0) 888 93 88 39 or email sales@zettex.com.

Read more

Zettex Sprayfoam NBS is a sprayable PUR insulation foam for the rapid application of a thermally insulating and sealing foam layer. It is particularly suitable for hard-to-reach, curved and irregularly shaped surfaces, such as corners and curves, pipework areas, technical rooms, roofs, walls and floors. It also fills small joints, gaps and uneven areas.

Read more

Screw the can firmly onto a suitable PU foam gun and fit the corresponding spray adapter. Hold the gun approximately 30 to 40 cm from the surface and apply the foam gently and evenly in thin layers. For greater layer thicknesses, apply several thin layers and allow each layer to cure sufficiently.

Read more

Sprayfoam NBS is a single-component foam in a 750 ml aerosol can that cures on contact with moisture, with a coverage of approx. 40 litres / 1.2 m² and a λ-value of 0.0.035–0.040 W/(m·K). 2K Foam consists of two components in 11 kg pressurised cylinders, cures chemically, yields 300–400 litres and has a λ-value of 0.021–0.024 W/(m·K). Sprayfoam NBS is therefore suitable for smaller surfaces, has fire class B2/E and can be cut after 10–14 minutes.

Read more

Get in touch

Questions about our products or options? If so, please contact us.
Send a message