Primer Z-05

« Back to overview
Primer Z-05

Zettex Primer Z-05 is a primer based on polyurethane and solvents for the optimum adhesion of Zettex MS polymers on porous surfaces. Improves the adhesion of Zettex MS polymers and provides protecting for example on wooden structures behind façade panels. Gives an attractive black finish. Improves the adhesion of Zettex MS 65 to cementbonded façade cladding.


• Gives head joints between the boards an attractive black finish
• Improves the adhesion of Zettex MS 60 to cement-bonded façade cladding

Available form
• Can 1 L

• Black and Transparent
Zettex Primer Z-05 can be used for brickwork, wood and concrete.

Pre-treatment framing
• Apply Zettex Primer Z-05 in one opaque layer and allow to dry for at least 1 hour. The moisture content of the wooden framing may not exceed 18%!

Tape application
• Apply the Zettex Fixeerband when Zettex Primer Z-05 has fully hardened (1 to 24 hours) in a vertical, continuous line. Press firmly and cut off with a sharp knife. Do not yet remove the cover paper from the Zettex Fixeerband

Pre-treatment boarding
• Use Zettex Profireiniger to clean the back of the board at the place of adhesion. Thoroughly clean with Zettex Witte or Bonte tricot cloths.

Board adhesive application
• Only apply Zettex MS 60 with the closable nozzle supplied next to the Zettex Fixeerband.

Board fixing
• Now remove the cover paper from the Zettex Fixeerband Apply the board within a period of 10 minutes after the removal of the cover paper. When the board has come into contact with the Zettex Fixeerband no more changes are possible. When the board has been positioned correctly press it firmly. Hands can finally be cleaned with the Zettex Cleaning Wipes
Features Specification
Application temperature +0 to +35℃
Density 1.35 g/ml
Frost-resistance during transport To -15 ℃
Download MSDS fileDownload TDS file Ask a question

Ask a question

Call me back

Call me back