Spraybond X46 Waterbase

« Back to overview
Spraybond X46 Waterbase
Zettex  Spraybond X46 Waterbase is a very fast drying anti-slip adhesive for fixating carpet tiles and the permanent adhesion of PVC. Zettex Spraybond X46 Waterbase is water resistant and environment friendly.

Areas of application:

• Gluing carpet floors such as tiles and strips
• Gluing textile floors


• Solvent-free
• Dries very fast
• Moisture-resistant
• Very efficient to use
• Increases productivity by 100%
• Patented
• VOC-free
Store between +5°C and +30°C.

Useful life

Six months if stored in unopened
packaging, as recommended.
​Preparing the surface
All surfaces must be clean, dry and frost free, as well as free from grease, oil, dirt, dust, individual materials and other contaminants (coatings, cement skin, etc.).

Application instructions

Spray the adhesive evenly over a width of 40 to 50 cm, holding the spray nozzle around 35 to 40 cm away from the surface. Distribute the spray adhesive evenly in a thin layer and wait 20 to 30 minutes for the adhesive to dry before laying the carpet tiles. Maximum open time is 48 hours. Lay PVC immediately in the wet adhesive. A spray gun and hose can be pruchased separately.
Features Specification
Application temperature 5 till 40 degrees
Temperature resistance Minus 40 till 150 degrees
Consumption 100 gramm/m2
Open time 4-6 min
Maximum yield 800 m2
Solids 50 %
Color Milky white
Spray pattern WEB
Download MSDS fileDownload TDS file Ask a question

Ask a question

Call me back

Call me back