Zettex Spraybond X40 is a very high quality heat-resistant contact adhesive for gluing all sorts of products on any surface.
- Very fast
- Heat resistant
- Extremely powerful
- Fast drying
- For universal use
- Ready to use
- DCM free
Areas of application
For gluing all types of surfaces. Thanks for the high solids and rubber content, this adhesive is extremely strong and safe to use. Zettex Spraybond X40 is also suitable for gluing surfaces sensitive to plasticisers such as PVC. The amount of plasticiser in the PVC must not exceed 16%. Testing is recommended before use.
Remove any moisture and grease from the surface being glued. Gently spray the contact adhesive onto both surfaces being glued. The ideal distance between the surface and the spray gun is 30 cm. Try to apply the glue in a single layer. Bring the surfaces together after 2-4 minutes and press or roller firmly. Wait at least twice as long to glue the surfaces together if the layers applied have overlapped. Check thoroughly to see whether there is sufficient contact between the glue layers if the surface is porous. Apply an extra layer, if necessary.
All surfaces should be dry and free from grease and dust