Winterfoam
« Back to overview
Description
Zettex Winterfoam is a durable and fast curing one-component insulation and assembly foam developed for sealing and filling joints, seams and connections of building elements. Zettex Winterfoam has been specially developed for use in freezing temperatures with a maximum of -30. The foam cures under influence of moisture. Zettex Winterfoam has excellent adhesion to most building materials such as stone, concrete, metal and various plastics (styropor, PU rigid foam, polyester, rigid PVC).
Material
Polyurethane
Product Properties
•Fast drying
•High yield
•High product density
•High insulation value
•Can be used on any substrate
Zettex Winterfoam is a durable and fast curing one-component insulation and assembly foam developed for sealing and filling joints, seams and connections of building elements. Zettex Winterfoam has been specially developed for use in freezing temperatures with a maximum of -30. The foam cures under influence of moisture. Zettex Winterfoam has excellent adhesion to most building materials such as stone, concrete, metal and various plastics (styropor, PU rigid foam, polyester, rigid PVC).
Material
Polyurethane
Product Properties
•Fast drying
•High yield
•High product density
•High insulation value
•Can be used on any substrate
Packaging
• Spray can 750 ml
Colour
Green
• Spray can 750 ml
Colour
Green
Applications
Sealing joints between partition walls, ceilings and floors.
Penetrations of pipes and conduits through walls and floors. Joints around door and window frames. Not suitable for underwater applications and not to be used to fill large closed spaces. For wider joints and joints deeper than 5 cm, apply the foam in several layers. Wait 15-30 minutes between layers.
Surface
All surfaces must be free of dust and grease.
Sealing joints between partition walls, ceilings and floors.
Penetrations of pipes and conduits through walls and floors. Joints around door and window frames. Not suitable for underwater applications and not to be used to fill large closed spaces. For wider joints and joints deeper than 5 cm, apply the foam in several layers. Wait 15-30 minutes between layers.
Surface
All surfaces must be free of dust and grease.
| Features | Specification |
|---|---|
| Propellant gas | No CFCs or HCFCs |
| Application temperature | -10 C to 35°C optimal: +15°C to +20°C) |
| Density of cured foam | 20 – 30 kg/m³ |
| Skin formation time | 8 – 12 min |
| Time before cutting | 50 – 100 min |
| Thermal conductivity coefficient | 30 – 35 mW/m.K |
| Thermal resistance | -40°C / +90°C |
| after curing, short duration: | up to +140°C) |
| Fire class | according to DIN4102-part 1 B3 |
| Shelf life | 12 months after filling date |
| Degree of fill in joint | 50% - 60% |
| Yield Approx. | 45 litres |